Status
Configuration
| Model |
Indy |
| CPU |
MIPS R5000SC / 150 MHz |
| Memory |
160 MB |
| Graphics |
XL 8bit |
| Video |
buitin |
| Disks |
4GB Seagate |
| Drives |
none |
| Other |
Phobos G130 Ethernet |
Operating System
| Operating System |
IRIX 6.5 |
| Hostname |
bilbo |
| IP Adress |
192.168.1.20 |
Parts
030-8123-009 Rev D - IP24 (Indy)
|
+-- 030-0986-002 Rev D - R5000SC150 CPU Module
|
+-- 030-8263-002 Rev B - 8bit Newport Graphics
|
+-- xxx-xxxx-xxx - Phobos G130 10/100 MBit Ethernet
Current Hardware Inventory
CPU: MIPS R5000 Processor Chip Revision: 1.0
FPU: MIPS R5000 Floating Point Coprocessor Revision: 1.0
1 150 MHZ IP22 Processor
Main memory size: 160 Mbytes
Secondary unified instruction/data cache size: 512 Kbytes on Processor 0
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Integral SCSI controller 0: Version WD33C93B, revision D
Disk drive: unit 1 on SCSI controller 0
On-board serial ports: 2
On-board bi-directional parallel port
Graphics board: Indy 8-bit
Integral Ethernet: ec0, version 1
E++ controller: ec1, version 0
Integral ISDN: Basic Rate Interface unit 0, revision 1.0
Iris Audio Processor: version A2 revision 4.1.0
Vino video: unit 0, revision 0, IndyCam not connected
Graphics board 0 is "NG1" graphics.
Managed (":0.0") 1024x768
8 bitplanes, NG1 revision 6, REX3 revision B, VC2 revision A
MC revision C, xmap9 revision A, cmap revision D, bt445 revision D
Display 1024x768 @ 60Hz, monitor id 15
Pictures
System
SGI Indy front.
SGI Indy back.
SGI Indy interior with R5000 CPU and XL8 graphics.
Options
Phobos G130 ethernet.
