If you have a part no and it isnt here then please send it to me and I'll add it to the list! Also, some of the part numbers are listed as 030-????-??? - if you have this part no then let me know!
Contributors!
Jörg Gerigk
Dave Williams @ MCE
Olaf Pueschel @ Olmos Workstations, Germany - huge list of IR/Kona
and Onyx parts! Plus Onyx2 parts!
IO4 boards and VCAM/GCAM
| 030-0240-00x | earliest IO4 I/O controller |
| 030-0377-00x | early IO4 I/O controller |
| 030-0646-xxx | common IO4 controller |
| 030-0646-107 | IO4 controller (supports IP21 R8000 and IP25 R10000) |
| 030-0815-00x | IO4 controller (supports KONA/InfiniteReality gfx) |
| 030-0536-00x | GCAM (for Extreme gfx option only - seems to require IO4 with 030-0646 or later) also has a FCI (flat cable interface) - see the 030-0501 below for uses |
| 030-0243-00x | VCAM |
| 030-0500-xxx | later VCAM - compatible with IR gfx on Onyx |
| 030-0502-00x | Remote VCAM for optional third card cage in rackmount Onyx/Challenge chassis |
IP19 CPU Boards and SC SIMMs
| 030-0374-00x | IP19 with dual R4400/150 1Mb SC CPUs (rev 008 and higher have 3.3V R4400/150s) |
| 030-0375-00x | IP19 with four R4400/150 1Mb SC CPUs |
| 030-0720-001 | IP19 with single R4400/200 4Mb SC CPU (Onyx RealityStation) |
| 030-0652-00x | IP19 with dual R4400/200 4Mb SC CPUs |
| 030-0653-00x | IP19 with four R4400/200 4Mb SC CPUs |
| 030-0806-00x | IP19 with single R4400/250 1Mb SC CPU (Onyx RealityStation) |
| 030-0805-xxx | IP19 with dual R4400/250 4Mb SC CPUs |
| 030-0804-xxx | IP19 with four R4400/250 4Mb SC CPUs |
| 030-0324-00x | secondary cache SIMM 256kb 10ns - blue stripe (IP19 only) |
| 030-0660-00x | secondary cache SIMM 1Mb 8ns - yellow stripe (IP19 only) |
IP21 CPU Boards
| 030-0636-00x | IP21 with single R8000/150? 4MB SC chipset |
| 030-0625-xxx | IP21 with dual R8000/75 4Mb SC chipsets |
| 030-0751-00x | IP21 with single R8000/75 4Mb SC chipset |
| 030-0702-00x | IP21 with dual R8000/90 4Mb SC chipsets |
IP25 CPU Boards
| 013-1672-00x | IP25 with single R10000/195 1Mb SC CPU (Onyx RealityStation or iStation) |
| 013-1675-00x | IP25 with single R10000/195 2Mb SC CPU (Onyx RealityStation or iStation) |
| 030-1107-xxx | IP25 with dual R10000/195 1Mb or 2Mb SC CPUs |
| 030-1072-xxx | IP25 with four R10000/195 1Mb or 2Mb SC CPUs |
MC3 Memory Boards and SIMMs
| 030-0245-00x | earliest MC3 memory board (32 SIMM slots - supports 16 & 64MB SIMMs) |
| 030-0604-xxx | MC3 memory board (32 SIMM slots - supports 16 & 64MB SIMMs) |
| 030-0613-xxx | MC3 memory board (32 SIMM slots - supports 16 & 64MB SIMMs) |
| 030-0614-xxx | MC3 memory board (32 SIMM slots - supports 16 & 64 Mb SIMMs) |
| 030-0614-106 | latest MC3 memory board (32 SIMM slots - supports 16 & 64Mb SIMMs) |
| 030-0256-00x | SIMM 16Mb 60ns 200pin (pink) |
| 030-0257-001 | SIMM 64Mb 60ns 200pin (purple) - two PCB sandwich |
| 030-0257-002 | SIMM 64Mb 60ns 200pin (purple) - single PCB |
VTX/RealityEngine2 Graphics Subsystem
| 030-0513-00x | DG2 display generator |
| 030-0233-001 | DI1 edge connector (connects DG2 and RM4/RM5s) |
| 030-0325-00x | GE10 geometry engine - 12 x Intel i860XP (RE2) |
| 030-0363-00x | GE10V geometry engine - 6 x Intel i860XP (VTX) |
| 030-0359-001 | RM4 raster manager (4 Mb TRAM) |
| 030-0360-001 | RM4T raster manager with resistors removed (4Mb TRAM) |
| 030-0347-00x | RM5T raster manager (16Mb TRAM) |
| 030-0506-00x | PAB1 Sirius Paddleboard Interface (optional) |
| 030-0342-xxx
030-1141-xxx |
Sirius VO2 Video Board (optional) |
KONA/InfiniteReality Graphics Subsystem
| 030-0686-004 | DG4-2 Display generator |
| 030-0687-004 | DG4-8 Display generator |
| 030-0711-001 | KONA Frontplane/grip/edge connector |
| 030-0681-003 | GE12-4 geometry engine - 4 proprietory SGI designed processors |
| 030-0683-004 | RM6-16 raster manager (16Mb TRAM) |
| 030-0684-004 | RM6-64 raster manager (64Mb TRAM) |
| 030-0766-00x | PAB2 Sirius Paddleboard Interface (optional) |
| 030-0342-xxx
030-1141-xxx |
Sirius VO2 Video Board (optional) |
Extreme Graphics Subsystem
| 013-0925-00x | GIO->Ebus slot adaptor for Extreme gfx option on Onyx (pcb is 030-0610-00x) |
| 013-1248-00x | GIO->VME slot adaptor for Extreme gfx option on Challenge |
| 030-8105-00x | Extreme VB2 board |
| 030-8226-00x | Extreme RU1 board |
| 030-8106-00x | Extreme GU1 board |
Onyx RealityEngine2/Extreme Deskside Backplane,
Power Bricks and Power Supply (OLS)
| 030-0310-00x | RealityEngine2/Extreme gfx deskside backplane |
| 030-0555-00x | KONA Ready gfx deskside backplane (works with IR, RE2 and Extreme gfx) |
| 030-0380-00x | System Controller (Dallas chip, power, fan, LCD control etc) + 1.5V ebus power brick |
| 030-0264-00x | 512 power board (has 12V and 5V power bricks for VME slots) |
| 030-0263-00x | 505 power board (has 2 x 5V power bricks) - 2 of these for RE2/Extreme graphics |
| 013-0513-00x | Power Supply OLS |
| 030-0278-00x | SCSI backplane with space for 7 drivs + trays |
Onyx RealityEngine2 Rack Backplanes, Power Bricks
and Power Supply (OLS)
| 030-0254-00x | RealityEngine2 gfx midplane (supports both standard card cages) |
| 030-????-??? | RealityEngine2 gfx backplane for optional third cardcage |
| 030-0380-00x | System Controller (Dallas chip, power, fan, LCD control etc) + 1.5V ebus power brick |
| 030-0742-00x | 512 x 2 power board with 2 x 12V and 2 x 5V bricks for VME slots |
| 030-0318-00x | 505 x 2 power board with 4 x 5V bricks for RE2 gfx only |
| 013-0513-00x | Power Supply OLS (2 for standard config. 3 + 3-phase power for 3 cardcage config) |
| 030-0275-00x | SCSI backplane for SCSIBox with 8 drive slots - not compatible with deskside or vault |
| 030-0271-00x | SCSI power board (has 12V and 5V power bricks - gets 48V from midplane and sits on top of the SCSI backplane) |
Onyx InfiniteReality Deskside Backplane, Power Bricks
and Power Supply (OLS)
| 030-0555-00x | KONA Ready gfx deskside backplane |
| 030-0380-00x | System Controller (Dallas chip, power, fan, LCD control etc) + 1.5V ebus power brick |
| 030-0739-00x | 512T power board (has 12V and 5V power bricks for VME) |
| 030-0677-00x | 303 power board - 2 required for IR gfx |
| 013-1592-00x | Power Supply OLS for IR gfx |
| 030-0278-00x | SCSI backplane with space for 7 drives + trays |
Onyx InfiniteReality Rack Backplanes, Power Bricks
and Power Supply (OLS)
| 030-0556-00x | KONA Ready gfx upper backplane - requires: 1 x 030-0677, 1 x 030-0743, 1 x 030-0742 |
| 030-0557-001 | KONA Ready gfx backplane for optional third cardcage - requires: 5 x 030-0677, 1 x 030-0739 |
| 030-0380-00x | System Controller (Dallas chip, power, fan, LCD control etc) + 1.5V ebus power brick |
| 030-0742-00x | 512T x 2 power board (has 12V and 5V power bricks for VME slots) |
| 030-0741-00x | 303 x 2 power board |
| 030-0743-00x | 305 x 2 power board |
| 030-0739-00x | 512T power board for third cardcage (1 required for third cardcage config only) |
| 030-0677-00x | 303 power board for (5 required for third cardcage three IR pipe config only) |
| 013-1592-00x | Power Supply OLS for IR gfx (2 for standard config, 3 + 3 phase power for 3 cardcage config) |
| 030-0275-00x | SCSI backplane for SCSIBox with 8 drive slots - not compatible with deskside or vault |
| 030-0271-00x | SCSI power board (has 12V and 5V power bricks - gets 48V from midplane and sits on top of the SCSI backplane) |
Challenge L/DM Backplane, Power Bricks and Power
Supply (OLS)
| 030-0314-00x | Challenge L backplane |
| 013-1003-001 | Challenge DM backplane - supports just one IP19/IP21/IP25* |
| 030-0380-00x | System Controller (Dallas chip, power, fan, LCD control etc) + 1.5V ebus power brick |
| 030-0264-00x | 512 power brick (has 12V and 5V power bricks for VME slots) |
| 030-0263-00x | 505 power brick (has 2 x 5V power bricks) |
| 013-0513-00x | Power Supply OLS |
| 030-0278-00x | SCSI backplane with space for 7 drives + trays |
Onyx/Challenge Mezzanine Boards for IO4
| 030-0244-00x | MEZZ SCSI S1 controller board (short) |
| 030-0527-xxx | MEZZ SCSI SCIP controller board (short) |
| 013-0963-00x | MEZZ FDDI dual SAS network board (short) |
| 013-0964-00x | MEZZ FDDI dual DAS network board (short) |
| 030-0753-00x | MEZZ SAMZ Audio/Serial daughter board for IO4 (short) |
| 030-0501-00x | MEZZ single FCI (flat cable interface) board (short) - eg. to connect remote VCAMs in optional third card cage to main IO4 in slot 11 of rackmount machines |
Some Interesting Onyx/Challenge VME Boards
| 030-0522-00x | HiPPI Interface Board (needs to be paired with an 030-0501-00x FCI board) |
| 030-0284-00x | MCO board for RealityEngine2 gfx |
